The Apex roofing is created to offer the beauty and elegance of traditional pan tile form and has a very distinctive feature.
Can be used for schools, apartments, hostels and etc.
This profile is manufactured from high strength steel and is organic-coated, ensuring long life span and minimal maintenance.
- Easy to Handle and Install
Apex sheets of the appropriate lengths can be put together in a short time as the installation is easy and does not require any special tools or techniques.
The Apex profile can be manufactured upon request to the desired lengths. A continuous length from ridge to eaves will minimize possible water leakage at end laps.
The light-weight property of Apex promises easy handling and does not impose unnecessary weight onto roof trusses.
- Clean Colorbond® steel
- PrimaMajuTM steel
Effective cover : 762mm Thickness for material : + 0.03mm
Standard step length : 350mm Effective width : + 3mm
Minimum roof pitch : 8° Finishing length : + 5mm
Other thicknesses are subject upon stock availability and time delivery
Roof battens for APEX must be fitted as shown in the daigram.
Note: The first batten spacing of 275mm is measured from the outside of the bargeboard, all subsequent batten spacing are at 305mm.
ROOF SHEET FASTENING Self drilling screws are recommended for fitting the roof sheets.
These are always placed in the troughs in the sheets. Firm fixing is required so that the roof sheets rest tightly against their base.