AJIYA Tempered Glass is heat treated glass with a residual surface compression in excess of 10,000 psi or an edge compression in excess of 9,700 psi. It is manufactured by heating ordinary float glass to its softening point (about 700 deg C) and then followed by cooling the glass rapidly by quenching it with an uniform blast of air on both surfaces simultaneously. AJIYA Tempered Glass, when broken, breaks into a multitude of small fragments, thus protecting against serious injuries.
Features:-
Safety & Standards | | AJIYA Tempered Glass is safety glazing material, conforming to the requirements of ASTM C 1048, ANSI 97.1, BS 6206, etc. | | Strength | | AJIYA Tempered Glass is approximately 4 to 5 times stronger than ordinary annealed glass. It has a higher bending strength and is more resistant to impact. | | Thermal Stress Resistant | | AJIYA Tempered Glass is more resistant to thermally induced stress and can, therefore, resist thermal shock which can cause ordinary annealed glass to crack. | | Fabrication | | AJIYA Tempered Glass cannot be drilled, cut or edged after being heat treated. All dimensions and specifications must be determined before the glass is tempered. | | Color | | In addition to clear glass, AJIYA Tempered Glass also comes in various colors or tints, and can be reflective or low energy as well. |
Special Heat Soaking:- AJIYA also offers heat soaking for its tempered glass. This process potentially reduces the risk of spontaneous breakage from nickel sulfide inclusions in tempered glass. | Specification | Product Size(mm) | Product Thickness(mm) | Type of Process | Minimum | Maximum | Minimum | Maximum | Tempered Glass | 180 x 180 | 6000 x 3000 | 3.0 | 19 |
Product Application:- |
Curtain Walls | Balustrades | Shop Fronts | Windows | Flameless Glass Doors | Greenhouses | Showcases | Escalator Side Panels |
|
|