Note : Pre-order item
Sillimantin 60 - Open Both End Tubes
Most frequently used ceramic material in kiln designs
- Type C530 according to DIN VDE 0335
- Application temperatures up to 1400°C
- Refractoriness up to 1300°C (subject to loading for roller applications)
- No reactions with heating elements
- This material can be formed using most moulding methods
- Numerous special designs are possible as well as a wide range of standard tubes
- This material is used successfully in laboratory and industrial kilns
Type 530 (DIN VDE 0335) medium fine structure Al2O3 content approx. 73-75%
Sizes :
Outer x Inner
diameter ( mm ) |
| 20 x 15 |
| 22 x 17 |
| 24 x 19 |
| 26 x 18 |
| 28 x 22 |
| 30 x 23 |
| 35 x 27 |
| 40 x 32 |
| 50 x 40 |
| 60 x 50 |
| 70 x 60 |
| 80 x 70 |
| 90 x 75 |
| 100 x 85 |
| 110 x 95 |
| 120 x 100 |
| 130 x 110 |
| 140 x 120 |
| 160 x 140 |
| 200 x 175 |
| 250 x 230 |
| 330 x 310 |
Physical properties :
| Alkali content |
≤1 |
| Type acc. To DIN VDE 0335 |
530 |
| Water absorption |
9 |
| Density |
2.35 |
| Flexural strength 20°C (3-point) |
45 |
| Young’s modulus |
60 |
| Thermal expansion 20-700°C |
5.3 |
| Thermal expansion 20-1000°C |
5.7 |
| Thermal conductivity 20-100°C |
1.4 |
| Max. working temperature |
1350 |
|
Permissible continuous temperature for
protection sheath acc. to DIN 43724
|
1600 |
| Thermal shock resistance |
very good |
| Pore Size ( average ) |
2 |
| Specific heat capacity 20-100°C |
800 |
Remarks :
- The above picture is for illustration only
- All the above descriptions are subject to change without prior notice
- Warranty : No
- Goods sold are not refundable, returnable or exchangeable
- Subject to minimum order quantities
Contact us @
Tel : +6012 728 1063
Email : enquiry@giitechnology.com |
(c) 2026 mdex.my All rights reserved
