MATERIAL SPECIFICATION / SELECTION GUIDE
Profile and Material Available
· OM4A – Aluminium c/w Polyester Paint Finish
· OM4B – Clean COLORBOND® steel / PRIMAMAJU™ steel / ELEMENTS™ steel
· Aluminium c/w Polyester Paint Finish
· Clean COLORBOND® steel / PRIMAMAJU™ steel / ELEMENTS™ steel
· 0.50mm TCT
· 0.38mm / 0.48mm TCT
Panel Effective Width & Deep
· OM4 A/B 100
· OM4 A/B 150
· 100mm width x 15mm deep
· 150mm width x 15mm deep
· OM4 A/B 100 / 150
Made to order with a minimum length of 2 meter.
Recommended optimum length of 6 meter,
Method of Installation
Silver / Gold / White
Other colours available upon request subject to stock available and time delivery
OM4 panels are fixed onto carrier Metal Bar (MB4). The panels are to be installed from right to left or vice-versa. The MB4 carrier has profiled flanges which are designed to fit the shape of the OM4 panels. Initially, the leg of the OM4 panel is slotted into the carrier MB4 and then light pressure is applied on the panel to ensure that the OM4 panel is clipped on firmly to the carrier.
OM4 100mm / 150mm
* Max. 600mm c/c for external. Max. 900mm c/c for internal
Spacing shall subject to actual site condition.
Important Note: Flat metal surfaces will display waviness commonly referred to as oil canning. This caused by steel mill tolerances and is a characteristic, not a defect, of panels manufactured from light gauge metal. Oil canning will not be accepted as a cause for rejection.